Skip Navigation
See Our Featured Monthly Products

How to Maintain Your Laboratory Freezer

How to Maintain Your Laboratory Freezer

If your laboratory freezer isn’t working right, then you need to know how to maintain it.

All good things eventually come to an end, including the life of your laboratory freezer. However, you want that to be much later rather than sooner, of course. Under severe conditions, like under heavy load, or in a harsh environment, or having been maintained poorly, your freezer may not work or last nearly as long as it could have otherwise. Luckily, there are a handful of different steps you can take to make sure that it runs as greatly as possible for as long as possible. If your freezer isn’t working right, a likely cause is its compressor. As such, you’ll need to take care of it, along with the other components of the laboratory freezer. Read on to learn how to maintain the lab freezer!

Avoid Opening and Closing the Freezer Door Too Often

This is an easy tip that a lot of people forget about. Each time you open or close your door, you are letting in warm air and humidity while also increasing the heat load on your compressor. Also, keeping the door open for longer than it has to be will increase the load.

Maintain an Environment That is Cool and Not Humid

A warm environment again has the effect of increasing the overall heat load on the compressor. What’s more, higher humidity can negatively impact the overall performance of the fridge or freezer. When the doors are opened, humidity in the air will enter and form condensation. This has to be removed, resulting in a lot more work for the machine. In laboratory freezers, it may mean the defrost cycle must be run more regularly.

Keep Your Machine and Surrounding Space Clean

It is much easier for dirt and dust to build upon your condenser coils. This insulates the coils, which makes heat removal a lot less effective and makes the compressor work harder to maintain the overall temperature. All the extra work will reduce its lifespan. It is recommended that cleaning the areas around your condenser coils and compressor is carried out twice annually or more often for any dust-prone environments. Make sure your laboratory is clean, too, in order to prevent the buildup of dust in the first place. Also, keep the area around the appliance as clear as possible will ensure air can circulate the right way.

FOR ALL ISO 17025 CALIBRATION SERVICES, CONTACT LAB PEOPLE TODAY

The Lab People Inc. is a trusted provider of laboratory equipment, services, supplies, and rental equipment for you and your laboratory. As an ISO 17025 accredited service organization, we stand behind our services with 100% satisfaction guaranteed for all of our customers. We offer on-site and off-site calibration services for balances, pipettes, moisture analyzers, force measurement, test weights and more. Services include preventative maintenance, SQ-Min, IQOQ, repairs, legal for trace/placed in service, verification and more.

For more information about how we can assist you, visit our websiteemail us, or give us a call at 1-800-296-2001!

Do not forget to follow us on Facebook, Twitter, and Linkedin!

This entry was posted on Monday, May 16th, 2022 at 4:06 pm. Both comments and pings are currently closed.

Request a Quote